Anchors

Features 1-3/4" load-bearing web with 3" wide full-length wear pad for abrasion resistanceAppropriately sized alloy steel D-rings provide simple pass-through choke-on installation.May be passed-through multiple times to shorten...

Manageable length is ideal for short-reach applications common with scaffolds and towersFeatures 1" polyester web with alloy steel D-ring.For temporary reusable choke-on installationsComplies with ANSI Z359.18-2017

Anchor features 1-3/4" Kevlar® webbing and thread with Nomex® label coverOvermold insulated D-ring provides advanced Arc Flash hazard protection.Familiar cinch-loop design provides simple choke-on attachmentFor temporary reusable...

Features stainless steel anchoring plate with alloy steel connecting D-ringPrecision-cut bushing provides 360° D-ring rotation.Ideally suited for temporary or permanent installation in steel and cured concreteAnchor requires...

Features single trolley adjustment with aluminum crossbar, swiveling D-ring and wheel platesIncludes high-density Nylacast wheels suitable for some food-rated installations.Fits beam flanges from 4" to 18" wide and up to 1-3/4" thickFor...

Designed for under-roofing ridge or field installationFeatures 8" stainless steel nailing plate with 2" connecting D-ring.Includes 16D stainless steel nails for installation to wood roof structuresMeets OSHA 1926.502 regulations ...

Designed for installation under roof ridge capFeatures 12" stainless steel nailing plate with 2-1/4" connecting D-rings.Includes 16D stainless steel nails for installation to wood roof structuresMeets OSHA 1926.502 regulations ...

Features 9" x 3" anchoring plate and 2-1/4" connecting ringIncludes 3" Grade 5 lag screws for roof ridge or field installation.For temporary reusable installation on wood structuresMeets OSHA 1926.502 regulations

Features 9" x 3" anchoring plates, 2-1/4" connecting ring and 5/16" Grade 80 chainBendable plate joiner conforms to flat or sloped surfaces up to 12/12 pitch.Includes 16D nails for roof ridge or field installationAlso includes 2-1/2"...

Features threaded aluminum crossbar and jaws with knurled rings for fine adjustmentExclusive recessed under-jaw ball bearings provide improved mobility.Fits beam flanges from 3" to 12-1/4" wide and up to 1" thickFor temporary mobile use...

Installs to 1-1/4" max. steel substrate thickness and fits hole sizes from 13/16" min. to 1-1/4" max.Anchor is ideally suited for fast relocation to changing anchor point locations.For temporary and reusable installation in steel...

Features large 2-1/4" x 3-1/4" internal dimension for easy connectionSolid one-piece forged construction with threaded stud and Grade 8 nut.For permanent installation to steel structures with 7/8" max. thicknessComplies with ANSI Z359...

Features large 2" x 3-1/4" internal dimension for easy connectionSolid one-piece forged construction with 5/8" bolt hole.For permanent installation to steel structures with user-supplied fastenersComplies with ANSI Z359.18-2017 ...

Features 2" x 4-1/2" alloy steel anchoring plate and D-ring1/2" bolt holes require user-supplied fasteners for fixed position installation.Complies with ANSI Z359.18-2017

Features 2" x 4-1/2" unplated alloy steel anchoring plate and plated steel D-ringPlain steel anchoring plate is ideally suited for permanent weld-on installation.1/2" holes also provided for bolt-on fixed position installationComplies...

Features 2" x 4-1/2" stainless steel anchoring plate and alloy steel D-ring1/2" bolt holes require user-supplied fasteners for fixed position installation.Complies with ANSI Z359.18-2017

Features 6" x 1-1/2" bend-in-place nailing plates with 3/4" connecting eyeIncludes 16D nails for roof ridge installation.For temporary use on wood structuresMeets OSHA 1926.502 regulations

Features 10-3/4" stainless steel post with 11/16" connecting eyeIncludes weather resistant post cap with zip-tie and 10" roof flange.4D stainless steel nails included for installation on wood roof trussesMeets OSHA 1926.502...

Rail anchor is designed for temporary and reusable installation onto existing train railAnchor fits rails ranging from 112 lb to 141 lb (approx. 2-5/8" to 3").Features interlocking twin plate design with detent pin for secure rail...

1/4" Stainless Steel wire construction with 15" overall lengthFeatures simple squeeze-open attachment.For temporary use on round overhead steel structuresFits 2" to 4" max. diameter structuresMeets OSHA 1926.502 regulations